是否进口:否 | 产地:西安市 | 加工定制:是 |
品牌:西安庆成 | 型号:BHR-100 | 类型:热电偶温度变送器 |
测量范围:54℃ | 订货号:578 | 货号:45 |
测量精度:245℃ | 输出信号:21 | 工作电压:25V |
是否跨境货源:否 |
SXC-3400电动执行器ZHG-1600,XWP-XS80温度监测仪XMT-SF506S
一、 概述General
“WD – 1型温度监测仪”是用于监测温度的智能化仪表。它通过对被监测系统的温度监测,并参照您设定的报警值,对系统的工作状况进行检测、显示与报警。
“WD-1 temperature monitor: is an intelligent instrument which is used for monitoring the temperature. Through the temperature monitoring to monitored system and according to the alarm value set by you, this instrument can inspect, display and alarm the operation condition of system.
本仪表采用高性能的中央处理器、传感器、工业级IC模块和高稳定性的元器件,并经过严格的老化与筛选。因此仪表具有稳定性好、精度高、抗干扰能力强等特点。仪表壳体采用不锈钢材料制成,适用于各种恶劣环境。
This instrument uses a central processing unit with high performance, sensor, IC module of industrial grade and components of high stability, and has passed strict aging and screening test. Therefore, this instrument is characterized by good stability, high precision and strong capacity of resisting disturbance. The instrument housing is made of stainless materials and is suitable for a variety of harsh environments.SXC-3400电动执行器ZHG-1600,XWP-XS80温度监测仪XMT-SF506S
二、主要功能说明II. Description of main functions
2.1 温度监测 Temperature monitoring
本系统监测、显示被监测系统的温度(如循环水的温度、油温等),当温度超过您设置的温度值和低于您设置的***温度值时,系统进行报警。
The system monitors and displays the temperature (such as temperature of circulating water, oil temperature, etc.) of the monitored system. When the temperature exceeds the maximum temperature value and lower than the minimum temperature value set that you set, the system will alarm.
2.2 报警 Alarm
系统报警后,可通过仪表输出的DC24V/1A/1Hz的报警电信号驱动外接报警器;同时,仪表面板上相应的状态指示灯闪烁,说明报警原因。
After system alarming, the external warner can be driven through the alarm signal of DC24V/1A/1Hz output by the instrument. At the same time, relevant status indicator lamp on the instrument flashes, indicating the cause of the alarm.
三、仪表的主要技术参数Main technical parameters of instrument
3.1 当前温度显示范围: 0~200.0 ℃
Current temperature display range: 0~200.0 ℃
3.2 温度上、下限设置范围: 0~199.9 ℃
Setting range of upper and lower limit of temperature: 0~199.9 ℃
3.3 温度显示分辨率: 0.1 ℃
Resolution of temperature display: 0.1 ℃
3.4 仪表工作电源: DC24V 2A
Working power of instrument: DC24V 2A
3.5 仪表自耗功率: <5W
Power consumption of instrument: <5W
3.6 仪表工作环境温度: - 30 ℃~+70 ℃
Working environment temperature of instrument: - 30 ℃~+70 ℃
3.7 仪表工作相对湿度: 15% ~ 95% (25℃时)
Working relative humidity of instrument: 15% ~ 95% (for 25 ℃)
3.8 仪表绝缘电阻: >50MΩ
Insulation resistance of instrument: >50MΩ
3.9 仪表耐压: 1000V 3分钟
Pressure proof of instrument: 1000V 3min.
四、仪表使用说明Instrument instructions
概述 General
SXC-3400电动执行器ZHG-1600,XWP-XS80温度监测仪XMT-SF506S